Table of Contents
Advertisement
APPENDIX
7.1
APPENDIX 1 - Wiring diagrams – Supplied with each case
7.2
APPENDIX 2 - Risk Analysis
Electrical - Replacement of electrical components
Ergonomic - Moving/ positioning/ adjusting cases
Falling -Connecting sensor probe wiring during
installation
Entanglement - Contact with fans when cleaning
Cuts and stabbing - Potential for cuts from broken
fluorescent tube or during tube replacement
Electrical - Potential for electric shock when cleaning
electrical fittings and components
Falling - Climbing on shelves
Crushing - Hands or fingers may become pinched or
crushed during the positioning of base trays, shelves &
stock
Slipping - Drain may leak or become blocked causing
water spillage
Cuts and stabbing - Potential for cuts caused by
damaged or missing parts
PAGE 36
HAZARD
CONTROL MEASURES
Request a service call. Electrically isolate cases before
works
Staff must be trained in the correct procedures for setting
up cases and ergonomic practices. PPE must be worn
Use of barriers & fall arrest systems as appropriate &
in accordance with State & Territory Legislation. Safe
working at heights
Electrically isolate cases before work is carried out. Staff
training,
Electrically isolate cases. Staff not to replace tubes. Call
service provider. PPE must be worn.
Electrically isolate cases before work is carried out. Staff
training, RCD. Keep electrical connections dry at all times.
Staff must be trained in OH&S procedures. MUST not
climb on shelves or cases.
Staff must be trained in the correct procedures for setting
up cases and ergonomic practices
Visual Inspection and regular maintenance. Request
service call when necessary.
Visual Inspection and regular maintenance. Request
service call when necessary. PPE must be worn when
handling broken or damaged parts.
MPD GLASS DOOR MULTIDECK - HUSSMANN
Advertisement
Table of Contents
