Before You Begin; Connecting The Handset - Cisco SPA 525G User Manual

Installing Your Phone

Before You Begin

Before You Begin

NOTE
!
CAUTION

Connecting the Handset

STEP 1
STEP 2
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)
Before you install and connect your phone, verify with your phone administrator (if
applicable) that the network is ready for the phone, read the safety notices, and
make sure you have all the phone parts and documentation available.
The RJ-11 port marked "AUX" is reserved for connection with the Cisco SPA 500S
Attendant Console that works with the Cisco SPA 525G/525G2. It is not for use as
a telephone line port.
Do not plug a telephone line cord into the port marked "AUX."
Find the longer end of the coiled phone cord. Insert it into the back of the phone
base in the slot marked with a phone symbol. This port is labeled #5 on the
SPA 525G/525G2 IP Phone Connections
Insert the short end of the handset cord into the jack at the bottom of the handset
(not shown).
graphic.
2
Cisco
23