(Optional) Attaching The Desk Stand - Cisco SPA 525G User Manual

Installing Your Phone

(Optional) Attaching the Desk Stand

(Optional) Attaching the Desk Stand

NOTE
STEP 1
STEP 2
STEP 3
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)
Number Component
1 Auxiliary port. Only for use with the Cisco SPA 500S attendant console.
2 Power port. Insert the power adapter plug into this port.
3 Additional Ethernet port. Connect an Ethernet cable to this port to provide
network connectivity to a PC. (This port cannot be used when the phone
is connected to the network via the built-in Wireless-G client.)
4 Switch (Ethernet) port. Connect the network cable to this port.
5 Phone cord slot. Insert one end of the phone cord into this slot and the
other into the jack at the bottom of the phone handset.
6 USB port. For use with an external USB memory device (optional). You can
also use the USB port on the Cisco SPA 525G2 model to charge a device
such as a Bluetooth-enabled mobile phone if your phone has a mini-USB
port.
Do not attach the desk stand if you want to mount the phone to the wall. If you are
attaching a Cisco SPA 500S attendant console attach the console before attaching
the desk stand.
Line up the tabs on the desk stand with the slots on the back of the phone.
Slide the bottom tabs into the slots
Lightly press down on the top of the desk stand. It should easily slide into the top
slots. Do not force.
2
25