Specifications - Cisco SGE2000P Datasheet

© 2008-2009 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
The Cisco SGE2000P provides an intuitive, secure management interface, enabling network
administrators to better utilize its comprehensive management feature set, for a better-optimized
and more secure network.
Features
Twenty-four 10/100/1000 Ethernet ports
●
Four Small Form-Factor Pluggable (SFP) slots (shared with four copper ports) for fiber
●
Gigabit Ethernet expansion
IEEE 802.3af PoE delivered over any of the twenty-four 10/100/1000 copper ports
●
Up to 15.4W available on the copper ports for powering PoE-enabled wireless access
●
points or VoIP handsets, with a maximum per-device PoE delivery of 185W available for all
ports
Dual images for resilient firmware upgrades
●
48-Gbps, nonblocking, store-and-forward switching capacity
●
Simplified QoS management using 802.1p, Differentiated Services (DiffServ), or type of
●
service (ToS) traffic prioritization specifications
Power redundancy when used with Cisco RPS1000 380W Redundant Power Supply Unit
●
Fully resilient stacking for optimized growth with simplified management
●
ACLs for granular security and QoS implementation
●
Can be configured and monitored from a standard web browser
●
Secure remote management of the switch via Secure Shell (SSH) and SSL encryption
●
802.1Q-based VLANs enable segmentation of networks for improved performance and
●
security
Private VLAN Edge (PVE) for simplified network isolation of guest connections or
●
autonomous networks
Automatic configuration of VLANs across multiple switches through Generic VLAN
●
Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP)
User/network port-level security via 802.1X authentication and MAC-based filtering
●
Increased bandwidth and added link redundancy with Link Aggregation Control Protocol
●
(LACP)
Enhanced rate-limiting capabilities, including back pressure and multicast and broadcast
●
flood control
Port mirroring for noninvasive monitoring of switch traffic
●
Jumbo frame support up to 10KB
●
Simple Network Management Protocol (SNMP) versions 1, 2c, and 3 and Remote
●
Monitoring (RMON) support
Fully rack mountable using the included rack-mounting hardware
●

Specifications

Table 1 contains the specifications, package contents, and minimum requirements for the Cisco
SGE2000P 24-Port Gigabit Switch.
Data Sheet
Page 2 of 6