Saeco DUALLY Operation And Maintenance page 101

If the entered password is
wrong,
returns to the previous
screen.
If the PASSWORD
forgotten, you can reset it
by entering a PUK code.
You have to request the
PUK code to the Technical
Service, who will guide you
through the procedure.
8.5.1 Password setting
It is possible to set two different passwords to access the
two different menus, the user menu and the technical menu.
Only the
Technician
change
password to access the
Technical menu.
To set the User Menu PASSWORD, proceed as
follows:
- Switch to programming mode as described in the previous
chapters.
- Press the "Down" button to scroll through the menu until
the "Change password" option:
the machine
Maintenance
is able to
the default
is
- Press the "OK" button to enter the submenu of the
selected option.
- Enter the current password. ("0" in case password is not
enabled - factory default for user menu).
- Press the "OK" button to confirm.
- Enter the new password.
English
101