REMOVING THE EXTERIOR PARTS
The exterior parts should be removed in sequence as
followings.
CAUTION:
Always disconnect the main lead plug from electcrial
outlet when removing the exterior parts.
A. Light Cover
1. Loosen the light cover set screw (a).
2. Pull light cover as shown so that the light cover hook
(b) will come off.
B. Base
1. Remove the extension table.
2. Tilt the machine backward and remove the 3 base set
screws (a, b, c). Remove the base.
3. Carefully disconnect the connector with holding the
lever (d).
This connector connects terminal box and power
circuit board.
1
a
2
2
3
SERVICE MANUAL
b
a
c
b
d
3