Cisco 805 Install Manual page 2

Safety
Warning
power to standby and unplug the power cord.
Warning
jewelry (including rings, necklaces, and watches). Metal objects will heat up when
connected to power and ground and can cause serious burns or weld the metal
object to the terminals.
Warning
national laws and regulations.
Warning
port, you must not connect the port to a public network that follows the European
Union standards. Connecting the port to this type of public network can cause
severe injury or damage your router.
Warning
(SELV) circuits to telephone-network voltage (TNV) circuits. LAN ports contain
SELV circuits, and WAN ports contain TNV circuits. Some LAN and WAN ports
both use RJ-45 connectors. Use caution when connecting cables.
Figure 2-1 shows the Cisco 805 router ports that include SELV circuits. For a definition of
SELV and TNV, see "Terms and Acronyms" in "About this Guide."
2-2
Cisco 805 Router Hardware Installation Guide
Before working on a system that has a standby/on switch, turn the
Before working on equipment that is connected to power lines, remove
Ultimate disposal of this product should be handled according to all
If the symbol of suitability with an overlaid cross ( ) appears above a
To avoid electric shock, do not connect safety extra-low voltage