Advertisement
www.freeservicemanuals.info
RX-8010RBK/ RX-8012RSL
Removing each board connected to the
rear side of the audio board
Prior to performing the following procedure, remove
the top cover and the rear panel.
1.
Cut off the tie band fixing the harness.
2.
Extract the plastic rivet a, which prevents the PWB
from pulling out, from the audio input board.
3.
Disconnect the connect CN501, CN243, CN205,
CN381, CN361 on the DVD board.
4.
Disconnect the harness from connector CN721,
CN722 and CN723.
5.
Disconnect the tuner board and audio board from
connector CN101, CN102 and CN301 on the audio
board.
6.
Pull out the video audio board, video board, S-video
board.
7.
Disconnect the DSP board from connector CN601 on
the audio board.
Audio
CN416
board
CN303
CN201
CN241
Video audio
board
1-4
(See Fig.5 to 11)
CN206
CN244
Video
S Video
board
board
Fig.9
Digitized in Heiloo the Netherlands
Plastic
rivet a
CN361
CN381
CN205
CN243
Fig.5
CN721
CN723
CN731
CN732
Fig.6
Fig.7
Tuner
board
CN102
CN101
Tie band
CN501
CN722
DVD board
Audio input
CN301
board
Fig.8
2/17/2019
Not for sale!
Advertisement
