Remington X3 POWER-X Series Manual page 5

ABOUT YOUR HAIR CLIPPER
HC3000AU SPECIFICATIONS
Power System
Full Charge Time
Runtime
Indicators
Voltage Type (adaptor voltage type) Worldwide 100-240V
CHARGING
• Before using your hairclipper for the first time, charge for 14-16 hours.
• Plug the adaptor into your hair clipper and then plug the charging
adaptor unit into a 100-240 volt domestic power outlet. Check to
ensure that the hair clipper On/Off switch is OFF. The Charging
Indicator Light will glow to indicate that it is charging.
• If the product is not going to be used for an extended period of time
(2 – 3 months), unplug it from the mains and store. Fully recharge your
hairclipper when you would like to use it again.
• Allow 14-16 hours for a complete charge.
• Use the hair clipper only with the charging adaptor supplied.
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
CORDED USE
• Connect the charging adaptor to the product then to the mains.
Note: Extended mains only use will result in the reduction of the battery life.
CORDLESS USE
• When the product is switched on and fully charged it can be used in
cordless mode for up to 45 minutes.
Cord/Cordless
14-16 Hours
45 Minutes
LED Charging Indicator
5