Samsung WD10T534ABW Service Manual page 18

 Reassembly
Part
Assy Panel Control
(LED)
Figure Description
1. Connect the terminal by hand. Take a look at
the hook and put it in the right place.
Make sure the Wire harness are not getting
stuck in other parts.
2. Assemble the hook of housing drawer and
aseemble screws at the top of the ASSY-PANEL
CONTROL with (+) screw driver.
Be careful not to break the hook.
3. Assemble 2 screws holding the drawer and
panel with (+) screw driver.
Disassembly and Reassembly _ 15