Definitions: Safety Guidelines; Important Safety Rules - DeWalt XR LI-ION DCL074 Original Instructions Manual

CORDLESS AREA LIGHT
DCL074
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Protection Class
Weight (without battery pack)
EC-Declaration of Conformity
Machinery Directive
Cordless Area Light
DCL074
D WALT hereby declares that the D
e
DCL074 is in compliance with the Directive 2014/53/EU and to
all applicable EU directive requirements.
The full text of the EU declaration of conformity can be
requested at D WALT, Richard- Klinger-Straße 11, D-65510,
e
Idstein, Germany or is available at the following internet address:
www.2helpu.com
Search by the product and type number indicated on
the nameplate.
WARNING: To reduce the risk of injury, read the
instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
WALT one of the
e
DCL074
V 18
DC
1
Li-Ion
IP54
kg 3.8
WALT Cordless Area Light
e

Denotes risk of electric shock.

Denotes risk of fire.

Important Safety Rules


WARNING! When using the area light, basic precautions
should always be followed, including the following:
a ) Read all the instructions before using the area light.
b ) To reduce the risk of injury, close supervision is necessary
when an area light is used near children.
c ) Do not operate any area light after it has received a
sharp blow, malfunctions or is dropped or damaged
in any manner. Return area light to the nearest
authorized service facility for examination, repair, or
electrical or mechanical adjustment.
d ) To reduce the risk of electrical shock, do not put area
light in water or other liquid. Do not place or store area
light where it can fall or be pulled into a tub or sink.
e ) Only use attachments recommended or sold by
the manufacturer.
f ) Risk of electric shock. Do not expose to rain.
Store indoors under dry conditions.
Specific Safety Rules for Area Lights

WARNING: Read all safety warnings and all
instructions for the battery pack and area light.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
• The area light is intended for workspace lighting only.
Use as directed. Any other uses may result in risk of fire,
electric shock or electrocution.
Do not expose the area light to rain or snow.
•
• Place the area light away from any heat source.
• Do not disassemble area light. Take it to an authorized
service center when service or repair is required. Incorrect
reassembly may result in a risk of electric shock, electrocution
or fire.
• When operating the area light outdoors, always provide
a dry location.
The light source contained in this luminaire shall only be
•
replaced by the manufacturer or his service agent or a
similarly qualified person.
• This light is dust protected and splashproof according to
protection class IP54. Do not submerge the tool in water.
• Secure the area light in upright position while transporting.

WARNING: To reduce the risk of fire, do not place
anything on top of the lens during or after operation
of the light.

WARNING: Do not place the area light in a position
which may cause anyone to intentionally or
unintentionally stare into the area light. Serious eye
injury could result.
English
3