Removing The Warm Heater - LG LSE4617ST Service Manual

WARNING
• DISCONNECT power supply cord
from the outlet before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal
injury, death or electrical shock.
CAUTION
• Be careful when you work on the
electric range handling the sheet
metal part.
- Sharp edge may be present and you can cut
yourself.
1. Turn off the electrical supply going to the range.
2. Pull the range away from the wall so that you can
access the rear panel.
3. Pull the controller from the range.(See page 3-4)
4. Pull the Cooktop from the range(See page 3-7)
5. Remove the ceramic glass cooktop(See page
3-8)
6. To remove the Warm heater
a) Remove the 2 Warm Heater Screws.
Warm HTR Screw
COMPONENT ACCESS

REMOVING THE WARM HEATER

b) Remove the 4 connectors from the warm
heater.
- When you assemble the Warm Heater,Make
sure the Warm Harness connection as below.
- When you assemble the Warm Heater, Make
sure the Warm Heater Direction.
3-19
CAUTION
Warm HTR Harness 1EA
Connector
position