Download Print this page

Product Setup - D-Link DES-1018MP Quick Installation Manual

16 ports 10/100mbps poe + 2 10/100/1000base-t/sfpcombo ports unmanaged switch
Hide thumbs Also See for DES-1018MP:

Advertisement

PRODUCT
SETUP
BEFORE SETTING UP THE DES-1018MP
Please follow the steps below to set up the switch:
1. Install the DES-1018MP in a cool and dry place. Refer to the Technical Specifications for the
acceptable operating temperature and humidity ranges.
2. Install the switch in a site free from strong electromagnetic source, vibration, dust, and direct
sunlight.
3. Leave at least 10 cm of space at the left and right-hand side of the switch for ventilation.
4. Visually inspect the power jack and make sure that it is fully secured to the power adapter.
Do not stack any device on top of the switch.
INSTALL THE POWER CORD RETAINER
To prevent accidental removal of the power cord, it is recommended to install the power cord
retainer together with the power cord.
2
1. With the rough side facing down, insert the tie into the
hole below the power socket.
2. Plug the power cord into the power socket of the
switch.
DES-1018MP

Advertisement

loading