Contents Of Packaging; Product Setup - D-Link DUB-2325 Quick Installation Manual

CONTENTS OF PACKAGING

CONTENTS
DUB-2325 USB 3.0 HUB
POWER ADAPTER
QUICK INSTALLATION GUIDE
If any of these items are missing from your packaging, contact your reseller.

PRODUCT SETUP

QUICK INSTALLATION
Step 1:
Plug the USB cable, located on the side panel of the DUB-2325, into
available USB Type-C port on your computer. The LED on the DUB-2325
will turn green.
Step 2:
Your computer will automatically detect and install the drivers for the
DUB-2325. You may now connect up to two USB devices to the USB 3.0
ports, one device to the USB Type-C port and insert SD and microSD
cards into the corresponding slots. Use the dual slot card reader to access
data on a SD and microSD card simultaneously.
Step 3:
You can plug the power adapter into the Micro-USB port, located on the
side panel of the DUB-2325, and into a power outlet or a power strip, if it
is required.
Note: if your computer does not detect the DUB-2325, please check and
ensure that all cables and the power adapter are connected
securely, and that the USB Type-C port on your computer is
functioning correctly. If not, try connecting to a different USB Type-C
port on your computer.
2
DUB-2325