Appendix B. Log Messages
PPPrx[x] ...
level 6
Advanced debugging decode of received PPP configuration packets.
CALL LOG MESSAGES
Power Up - last down cause: <reason>
level 0 (displayed as level 1 after the unit is reset)
This is the <reason> for the last reset. Most are caused by internal er-
rors. Possible reasons are:
Bus Error - Bad address occurred on the internal bus
Kernel error - General operating system error
No SBCs - Mail resources used up or lost
Router stack error - Fatal error in protocol stack
general panic - general error
no rip - rip tasks could not start
out of memory - out of available memory
out of TCP ports - all TCP ports are used up
unknown error - unknown fatal error has occurred
Set timer error - Cannot set real-time clock
Software Watch Dog Reset - Software watchdog was not updated
B-6
Express L768 User Manual
61203192L1-20