Securing Your Child Harness - Britax Steelcraft one 2 Instruction Manual

Lightweight tandem travel system
Table of Contents

Advertisement

Stroller Operation

Securing Your Child Harness

WARNINGS:
ENSURE YOUR CHILD IS SECURED WITH A
CORRECTLY ADJUSTED HARNESS.
THE ADJUSTED HARNESS SHOULD CLOSELY FIT
THE CHILD.
NEVER LEAVE THE HARNESS BUCKLED WHEN
NOT FITTED TO A CHILD IN THE STROLLER,
BECAUSE THE HARNESS CAN FORM LOOPS
WHICH MAY POSE A STRANGULATION HAZARD.
WHEN HARNESS IS NOT IN USE, DISCONNECT
SHOULDER STRAPS FROM THE WAIST STRAPS
AND BUCKLE TO PREVENT STRANGULATION.
A five point harness is provided to restrain your child.
Buckle tongues separate for added safety.
To reconnect buckle tongues and to secure the child in
the harness please follow the steps below carefully.
PLEASE NOTE:
Each waist buckle tongue has a raised rib on
one side and can only be locked into the buckle assembly with
the raised rib facing up. Ensure the harness straps are not
twisted as they may become uncomfortable for the child.
26 |
A
Rib
B
A
lways apply the brakes
before placing child in
stroller seat.
Position the shoulder strap
near the child' s shoulder
and position crotch strap
between legs.
Thread the waist strap
buckle tongues through
the shoulder straps
tongue guides.
B
Hold the centre button
in on the crotch buckle
and insert the waist
buckle tongues into the
crotch strap buckle until
you hear a ' c lick'.
Repeat the procedure on
the other side.
Please ensure it is locked.

Advertisement

Table of Contents
loading

Table of Contents