Table of Contents
Advertisement
Accessories Available for your Opener
SECURITY Multi-Function
953C
Remote Control:
Includes visor clip.
Motion Detecting Control Panel:
935C
Multi-function door control with motion
sensor that automatically turns opener
lights on for 5 minutes when it detects a
person entering the garage. Sensor can
be easily deactivated when desired.
956C
SECURITY Multi-Function
Mini Remote Control:
With key ring and Velcro
fastening strip.
940C
SECURITY Keyless Entry:
Enables homeowner to operate garage door opener from outside by
entering a password on a specially designed keyboard. Also can add a
temporary password for visitors or service persons. This temporary
password can be limited to a programmable number of hours or entries.
To Add the Keyless Entry
We recommend that you program your password
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
If you have a Multi-Function door control:
1. With the door closed, press the four digit password
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
If you do not have a Multi-Function door control:
1. Choose a 4-digit password using numbers from
0 to 9 (a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the password, then
press and hold the Enter button. The indicator light
on the door opener panel will blink.
3. Press and release the "Smart" (learn) button on
the opener panel. After the opener lights flash,
release the Enter button.
Test by pressing the password, then press Enter. The
door should begin to move.
Setting a Temporary Password
In addition to your personal entry password which
works at all times, a 4-digit temporary password can
be added for the convenience of visitors or service
persons.
Outside Quick Release:
7702C
Required for a garage with NO
access door.
8 Foot Rail Extension Kit:
8704C
To allow an 8 foot door to open
fully.
Extension Brackets:
41A5281
(Optional) For safety sensor
installation onto the wall or floor.
To order call: 1-800-654-4736
This allows authorized persons a way to gain
temporary access.
After a programmed number of hours or number of
accesses, this temporary password expires and will
no longer open the door. The temporary password
can be used to close the door even after it has
expired. To set a temporary password:
1. Press the four buttons for your personal entry
password (not the last temporary password), then
press and hold the
The opener light will blink three times. Release the
button.
2. Press the temporary 4-digit password you have
chosen, then press Enter.
The opener light will blink four times.
3. To set the number of hours this temporary
password will work, press the number of hours
(up to 255), then press .
OR
3. To set the number of times this temporary
password will work, press the number of times
(up to 255), then press #.
The opener light will blink once when the temporary
password has been learned.
Test by pressing the four buttons for the temporary
password, then press Enter. The door should move. If
the temporary password was set to a certain number
of openings, remember that the test has used up one
opening.
To clear the temporary password, repeat steps 1-3,
setting the number of hours or times to 0 in step 3.
38
button.
Advertisement
Table of Contents
