Care And Cleaning; Replacing The Batteries - Braun TempleSwipe BST200US Manual

Temperature unit conversion and mute function
This thermometer has the ability to switch temperature units
from Fahrenheit to Celsius as well the ability to mute the device.
When the device is in mute mode, all audible sounds will be
disabled. The mute icon will be displayed on the LCD at all
times when the device is in mute mode.
1
While the device is off, press and hold the
6 seconds until SET appears on the screen.
Release the measurement button
2
temperature scale and mute option are shown. The
selected icons will flash on the screen to confirm the new
setting, then the thermometer will turn off automatically.
Calibration
The thermometer is initially calibrated at the time of manufacture. If this
thermometer is used according to the use instructions, periodic re-adjustment
is not required. If at any time you question the accuracy of temperature
measurements, please contact Consumer Relations.

Care and cleaning

Use an alcohol swab or cotton swab moistened with alcohol
(70% Isopropyl) to clean the thermometer casing and the
measuring probe. Ensure that no liquid enters the interior of the
thermometer. NEVER use abrasive cleaning agents, thinners or
benzene for cleaning and NEVER immerse the instrument in
water or other cleaning liquids. Take care not to scratch the
surface of the lens by replacing the protective cap after use.

Replacing the batteries

The TempleSwipe™ Thermometer comes with 2 AAA batteries.
To install the batteries, slide open the battery door as shown.
Insert 2 AAA batteries, correctly positioning with positive "+"
and negative "-" as shown. Replace the battery door and
close securely.
Replace the batteries when the flashing battery symbol appears
on the LCD screen. Dispose of batteries according to local waste
management directions.
8
button for
when the desired