Assembly; Main Pcb Assembly - LG LSCE365ST Service Manual

Main PCB assembly (1)

WARNING
• DISCONNET power supply before servicing.
• Replace all panels and parts before
operating.
• RECONNECT all grounding devices.
- Failure to do so can result in severe personal injury, death
or electrical shock.
1. Put the PCB base mold on the Heatsink.
2. Put PCB assembly under hook.
NOTE : If PCB assembly have residual board under Triac, remove that.
Copyright © 2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes

ASSEMBLY

• Be careful when you work on the Cooktop
handling the sheet metal part.
< NOTE > If you assemble Heatsink into
PCB mold base, screw down 2 holes.
- 44 -
CAUTION
LGE Internal Use Only