Gathering; Darning - Brother XL-2610i Operation Manual

USING ATTACHMENTS AND APPLICATIONS ——————————————————————————————————————

Gathering

Stitch Name
Straight Stitch
1 Set the pattern selection dial to Straight
Stitch.
2 Loosen the tension of the upper thread so that
the lower thread lies on the underside of the
material.
3 Sew a single row (or many rows) of straight
stitches.
4 Pull the lower threads to gather the material.
38
Stitch
Pattern Length
[mm (inch)]
4 (3/16)

Darning

Stitch
Pattern
Name
[mm (inch)]
Straight
Stitch
1 Turn off the machine.
Place the darning plate on the needle plate,
then turn on the machine.
2 Set the pattern selection dial to the Straight
Stitch.
3 Put the section you want to darn under the
presser foot together with fabric for
reinforcement.
4 Lower the presser foot.
5 Begin sewing by alternating between gently
drawing the work away from you and pulling
it toward you.
6 Repeat this motion until the darn section is
filled with parallel lines of stitching.
Stitch
Length Foot Other
Zigzag
Darning
Any Presser
Plate
Foot