Remote Control Panel; Specifications - Yamaha R-N402 Service Manual

■ REMOTE CONTROL PANEL

RAX34

■ SPECIFICATIONS

■ Audio Section
Minimum RMS Output Power (Power Amp. Section)
(40 Hz to 20 kHz, 0.2 % THD, 8 ohms / L/R drive)
U, R, T, K, A, B, G, S models ..................................... 100 W + 100 W
L model .......................................................................... 85 W + 85 W
Dynamic Power Per Channel (IHF)
8 / 6 / 4 / 2 ohms ............................................125 / 150 / 165 / 180 W
Maximum Power Per Channel (1 kHz, 0.7 % THD, 4 ohms)
[B, G models]
................................................................................................ 115 W
IEC Power (1 kHz, 0.2 % THD, 8 ohms)
[B, G models]
................................................................................................ 110 W
Damping Factor (1 kHz, 8 ohms)
SPEAKER-A .....................................................................120 or more
Maximum Effective Output Power (JEITA)
(1 kHz, 10 % THD, 8 ohms)
R model ....................................................................................140 W
L model .....................................................................................125 W
Input Sensitivity/Input Impedance (1 kHz, 100 W/8 ohms)
CD etc. ................................................................ 500 mV / 47 k-ohms
Maximum Input Signal (1 kHz, 0.5% THD)
CD etc. ...........................................................................2.2 V or more
Output Level/Output Impedance (1 kHz, 500 mV, CD etc. input)
LINE OUT ........................................................... 500 mV / 2.2 k-ohms
8 ohms load, Headphone jack ............................ 470 mV / 470 ohms
Frequency Response (CD etc.)
20 Hz to 20 kHz ................................................................ 0 ± 0.5 dB
10 Hz to 100 kHz .............................................................. 0 ± 3.0 dB
Total Harmonic Distortion (20 Hz to 20 kHz, 50 W/8 ohms)
CD etc. to SP OUT ......................................................... 0.2 % or less
Signal to Noise Ratio (IHF-A)
CD etc., Input shorted 500 mV .................................. 100 dB or more
Residual Noise (IHF-A)
................................................................................................ 70 μ V
Channel Separation
(CD etc. Input 5.1 k-ohms shorted)
1 kHz ......................................................................... 65 dB or more
10 kHz ....................................................................... 50 dB or more
Tone Control Characteristics
Bass
Boost/Cut (50 Hz)................................................................. ±10 dB
Treble
Boost/Cut (20 kHz) ............................................................... ±10 dB
Optical Jack, Coaxial Jack Support fs
................................ 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz /
R-N402/R-N402D
176.4 kHz / 192 kHz
7