Advertisement
Quick Links
Page 1 of 18
CP0506
FITTING INSTRUCTIONS FOR CP0506 AERO CRASH PROTECTORS
MV AGUSTA BRUTALE 1000RR 2020-
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G Racing
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Advertisement
Related Manuals for R&G CP0506
Summary of Contents for R&G CP0506
- Page 1 Page 1 of 18 CP0506 FITTING INSTRUCTIONS FOR CP0506 AERO CRASH PROTECTORS MV AGUSTA BRUTALE 1000RR 2020- HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT...
-
Page 2: Tools Required
Page 2 of 18 CP0506 TOOLS REQUIRED GENERAL TORQUE SETTINGS • 14mm & 19mm A/F SOCKET & WRENCH M4 BOLT = 8Nm M5 BOLT = • TORQUE WRENCH (UP TO 90Nm) M6 BOLT = • 4mm & 5mm Hex keys M8 BOLT = 20Nm •... - Page 3 Page 3 of 18 CP0506 AERO-STYLE CRASH PROTECTOR ORIENTATION LHS & RHS EXPLODED ASSEMBLY VIEW R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 4 Page 4 of 18 CP0506 FITTING PICTURES Picture 1 Picture 2 Picture 3 Picture 4 Picture 5 Picture 6 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
-
Page 5: Fitting Instructions
Page 5 of 18 CP0506 FITTING INSTRUCTIONS Before removing engine bolts, ensure the bike is upright and supported by a suitable engine stand or jack placed under the sump of the motorbike to support the weight of the engine, this will prevent the engine from moving during fitting. DO NOT REMOVE MORE THAN 1 ENGINE BOLT AT ANY TIME. - Page 6 Page 6 of 18 CP0506 a 25% restocking and handling fee (25% of the gross value exc. P&P – at the prevailing price at time of purchase). The customer must pay any and all carriage charges. No returns of discontinued products, unless within 14 days of purchase.
- Page 7 Page 7 of 18 CP0506 NOTICE DE MONTAGE POUR CP0506 PROTECTIONS CRASH MV AGUSTA BRUTALE 1000RR 2020- E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS E PAS PROCEDER AU MONTAGE TANT QUE VOUS N...
- Page 8 Page 8 of 18 CP0506 TOOLS REQUIRED GENERAL TORQUE SETTINGS • 14mm & 19mm A/F SOCKET & WRENCH M4 BOLT = 8Nm M5 BOLT = • TORQUE WRENCH (UP TO 90Nm) M6 BOLT = • 4mm & 5mm Hex keys M8 BOLT = 20Nm •...
- Page 9 Page 9 of 18 CP0506 ORIENTATION DE LA PROTECTION CRASH VUE D’ENSEMBLE CÔTÉ GAUCHE ET DROIT R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 10 Page 10 of 18 CP0506 PHOTOS DE MONTAGE Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com...
-
Page 11: Notice De Montage
Page 11 of 18 CP0506 NOTICE DE MONTAGE Avant de retirer les boulons du moteur, assurez-vous que la moto soit bien droite et soutenue par un support moteur approprié ou un cric placé sous le carter de la moto pour supporter le poids du moteur, cela empêchera le moteur de bouger pendant le montage. - Page 12 Page 12 of 18 CP0506 R&G RACING RETURNS POLICY (NON-FAULTY GOODS) Returns must be pre-authorised (if not pre-authorised the return will be rejected). Goods may only be returned direct to us if they were purchased direct from us (customer must prove if necessary). Otherwise to be returned to original vendor.
- Page 13 Page 13 of 18 CP0506 MONTAGEANLEITUNG FÜR CP0506 AERO STURZPADS MV AGUSTA BRUTALE 1000RR 2020- EILE SIND AUF DEN NACHFOLGENDEN EITEN ABGEBILDET UND GEKENNZEICHNET IE ABGEBILDETEN EILE DIENEN LEDIGLICH ZUR RKLÄRUNG Ü BERPRÜFEN IE ZUERST DASS ALLE EILE VORHANDEN SIND...
- Page 14 Page 14 of 18 CP0506 SIE BENÖTIGEN FOLGENDES WERKZEUG ALLGEM. ANZUGSDREHMOMENT: • 14mm & 19mm A/F STECKSCHLÜSSEL M4 SCHRAUBE = 8Nm M5 SCHRAUBE = • DREHMOMENTSCHLÜSSEL (BIS 90Nm) M6 SCHRAUBE = • 4mm & 5mm Inbusschlüssel M8 SCHRAUBE = 20Nm •...
- Page 15 Page 15 of 18 CP0506 MOTORRAD VORNE MONTAGE - BILDER Abbildung 1 Abbildung 2 R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 16 Page 16 of 18 CP0506 Abbildung 3 Abbildung 4 Abbildung 5 Abbildung 6 MONTAGEANLEITUNG Bevor Sie Die Schrauben für den Motor entfernen, stellen Sie sicher, dass das Motorrad aufrecht steht und der Motor mit einem geeigneten Ständer/Heber unterhalb der Ölwanne gestützt wird.
- Page 17 Page 17 of 18 CP0506 • Entfernen Sie die Befestigungsschraube für den Motor an der linken Seite des Motorades mit einem 14mm Steckschlüssel wie in Abbildung 4 abgebildet. • Die Sturzpad-Einheit zusammenbauen wie in der Zeichnung Zusammenbau auf Seite 3 dargestellt.
- Page 18 Page 18 of 18 CP0506 tatutory rights and does not refer to faulty goods. R&G Racing Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...