Behringer Pro-1 Documentation And Instructions page 28

Behringer Pro-1 Ctrlr panel documentation and instructions
The following actions are checked:
─ Creating a track using the plugin
─ Displaying the instrument and checking all controls are working fine including Load/Save...
─ Playing a wav file from the file browser. The DAW is often using ASIO while the wav files are
played with the Windows or MacOs native player
─ Saving and opening a project in the DAW. This is checking that the last patch saved is restored
correctly. As in standalone mode, the last patch used is restored (not the last position of the
knobs!)
─ Creating a second track with the plugin
─ Saving and opening a project in the DAW. This is checking that there can be different tracks using
the plugin with each of their last patch saved restored correctly.
─ Creating a preset in the DAW. Each DAW has different ways to do this. At this stage it is not
possible to load .fxp presets without issues. Creating preset can also be done by saving full
channel strips that are including the VST instrument setup (Cakewalk, Reaper, Logic)
─ Creating a track by selecting a DAW preset instead of selecting the plugin. Checks if the correct
patch is restored. When working, this is done by loading a saved channel strip.
─ Replacing a DAW preset by another DAW preset
Replacing the DAW preset in a track by another DAW preset: this should not be done except
for Reaper/Logic when presets are saved as FX chains / channel strips and can be replaced.
The workaround is to always use the LOAD and SAVE buttons from the Pro-1 panel itself.
Cubase
Create track
Using the plugin
Play wav
Save and restore
project in DAW
Save and restore
project with 2 tracks
Create DAW preset
Create track based on
DAW preset (saved
channel strip)
Replace DAW preset by
another DAW preset
sunny.synths@gmail.com
Cakewalk Reaper Ableton Studio 1
v2.0
Logic
Page 28 of 49