Behringer Pro-1 Documentation And Instructions page 25

Behringer Pro-1 Ctrlr panel documentation and instructions
Wav file play settings
Wav files will be played for the duration set in the Duration pulldown (3s, 5s, 10s or Full).
Activating Auto Play will automatically trigger the play of the .wav files OR trigger playing the .wav
file corresponding to the clicked Pro-1 .syx file (if found). If there is no corresponding .wav file then
nothing happens.
If some wav files are playing but not others, check that you are not using special characters in
the filename. The panel can handle single quotes but maybe not other characters.
Panel zoom
The panel can be zoomed by using the Ctrl + or Ctrl – keys combinations. This is also available from
the View menu.
Using that method is incrementing/decrementing the zoom factor by 10% steps but the main issue
(for some users) is that the zoom factor is not memorized and thus at next usage the zoom is back at
100%.
This is the reason of the implementation of this "manual" zoom. Modifying the zoom factor using
those buttons is changing the zoom by 5% steps and will make it keep the zoom factor for next
usage.
If you are still modifying the zoom using the View menu or the Ctrlr + / Ctrlr – keys, no worries! The
"manual" zoom is reading the current zoom factor on the panel each time one of the main top panel
button is used (Load, Save, Init, Rename).
Display and Export info
On the right side of the panel, you have access to
Program parameters:
─ Use the Display button to list the parameters of the
current program
─ Use the Export button to export as a .txt file the
parameters of the current program (it is not needed
to first display them before exporting)
─ Use the Diff w/Init button to just display the
differences in comparison with the Init program
sunny.synths@gmail.com
v2.0
Page 25 of 49