Setup Memory; Saving A Setup - Casio E-CON Software Manual

3. Setup Memory

You can use setup memory to save EA-100 setups you create using Setup Wizard or
Advanced Setup in calculator memory for later recall when you need them.
k Saving a Setup
A setup can be saved when any one of the following conditions exist.
• After creating a new setup with Setup Wizard
See step 7 under "To create an EA-100 setup using Setup Wizard" on page 2-2.
• After creating a new setup with Advanced Setup
See step 6 under "To create an EA-100 setup using Advanced Setup" on page 2-4 for more
information.
• While the E-CON main menu is on the display
Performing the setup save operation while the E-CON main menu is on the display saves
the contents of the current setup memory area (which were created using Setup Wizard or
Advanced Setup).
The setup save procedure is identical in all of the above cases.
u To save a setup
1. Start the save operation by performing one of the function key operations described
below.
• If the final Setup Wizard screen is on the display, press 3(SAVE).
• If the Advanced Setup menu screen is on the display, press 3(MEM).
• If the E-CON main menu screen is on the display, press 2(MEM).
• Performing any one of the above operations causes the setup memory list to appear.
• The message "No Setup-MEM" appears if setup memory is empty.
3-1
Setup Memory