Table of Contents
Advertisement
A5
+12 V switching voltage output
(max. 0.5 A)
on blade contact A 5 when the radio is
switched on.
For automatic aerial (extend/retract),
aerial amplifier (operating voltage) etc.
A4
+12 V ignition voltage
Connect to terminal 15 if you wish to switch
the car radio on and off with the ignition/start
switch.
The A4 blade contact may also remain free.
In this case, the car radio must always be
¡
switched on and off with the
IO
In addition, the car radio is not automatically
switched off after 1 hour if the ignition is off.
The Security LED does not flash.
Loudspeakers
Blade contacts B: Figure
Maximum output power
with 4 Ω loudspeakers: 4 x 7 W.
Front speakers
B3 right-hand +
B4 right-hand –
B5 left-hand +
B6 left-hand –
í
Do not electrically connect the speaker
contacts to each other and do not
button.
connect them to earth.
+
Rear speakers
B1 right-hand +
B2 right-hand –
B7 left-hand +
B8 left-hand –
10
Installation and Removal
Advertisement
Table of Contents
