Notifications; Turning On/Off The Condensation Monitoring Function; Turning On/Off The Universal Contact Monitoring Function - Siemens RDS110 User Manual

9
Operating the thermostat from the mobile app

Notifications

9.7 Notifications

9.7.1 Turning on/off the condensation monitoring function

9.7.2 Turning on/off the universal contact monitoring
48 | 59
NOTE: For more information about schedules, see Setting schedulers [➙ 49].
Adjust the temperature setpoint
Do one of the following:
●
On the temperature control widget, drag the temperature knob over the
temperature line as desired.
●
Tap the minus or plus icon on the widget.
Change the temperature unit
1. In the app, tap and then tap "Account".
2. Expand the "Unit" field, and then change the temperature unit.
The mobile application notifies you of condensation risks and universal contact
status changes. If there are notifications, a red indicator appears on the upper right
corner of the menu icon,
notifications.
By default, the mobile application can receive condensation and universal contact
notifications. You can turn the notifications off as needed.
To view notifications
●
Tap > "Notifications".
If you've configured a condensation monitor as an input in the local thermostat, the
condensation monitor detects the formation of condensation on chilled ceilings or
at critical spots of heating or ventilation systems. If there is a risk of condensation,
the thermostat sends a warning signal for your control actions. The same signal
can also be sent to the mobile application if the related function is activated.
For more information about how to configure a condensation monitor input, see
Changing system setup.
To turn on/off the condensation monitoring function
1. Tap > "Devices".
2. Select the device that you want to turn on or off the condensation monitoring
function for.
3. Drag the slider to the right or left to turn it on or off. The function is on by
default.
function
If you've configured a universal contact as an input in the local thermostat, you can
use the mobile application to see if it is switched on or off if the universal contact
monitoring function is turned on.
For more information about how to configure a universal contact input, see
Changing system setup.
. Expanding displays the exact number of
A6V10877569_en--_e