Operating The Thermostat On The Device; Temperature Control - Siemens RDS110 User Manual

6 Operating the thermostat on the device

6.1 Temperature control

A6V10877569_en--_e
Your thermostat acquires the room temperature using the built-in sensor and/or the
external room temperature sensor, and maintains the setpoint by delivering control
commands to heating equipment. On the home screen, you can see the current
room temperature and adjust the temperature setpoint as you want.
Your thermostat also allows you to select your preferable temperature unit between
°C (the default unit) and °F.
NOTICE
After the initial setup of the thermostat, the displayed room temperature may not
be correct because the temperature sensors need time for the calibration. Wait for
at least one hour for the calibration.
Adjust the temperature setpoint on the home screen
●
On the Home screen, drag the temperature slider to the right to increase the
temperature setpoint, or to the left to decrease the temperature setpoint.
Change the temperature unit
1. On the Home screen , tap
2. Tap , then tap to change from Celsius to Fahrenheit, or tap
from Fahrenheit to Celsius.
Operating the thermostat on the device
Temperature control
, and then tap .
6
to change
21 | 59