Table of Contents
Advertisement
7.4.5 Switching between Heating and Cooling
7.4.6 Controlling humidifier/dehumidifier
7.5 Checking device notifications
7.5.1 Turning on/off universal contact monitoring
A6V10733807_enUS_c
Operating the thermostat from the mobile application
5. Repeat steps 3 and 4 to set other switching points.
6. Tap Save.
7. To copy the current day's schedule to other days, tap Copy and follow the on-
screen instructions.
NOTE: Max. eight switching points per day can be set. To delete one, tap
switching point marker.
Change the preset setpoints for different operating modes
1. On the temperature control widget screen, tap
2. Tap any of the modes, e.g., Unoccupied, to expand the preset setpoints.
3. Drag the temperature slider to the setpoint.
In the app, the default Auto mode can be changed to Heat or Cool ", or "Off
completely. For more information about switching between heating and cooling,
see Operating modes overview [➙ 15].
Change the default Auto mode
1. On any of the widget screen, tap
Thermostat mode.
2. Select Heat, Cool ", "Off or Auto.
Turn off the humidifier/dehumidifier or allow the thermostat to automatically adjust if
and when to turn it on/off from the mobile application.
NOTE: If no humidifier/dehumidifier is connected to the thermostat or if the
thermostat output is not configured as humidifier/dehumidifier,
humidifying/dehumidifying is not available in the app.
Control humidifying/dehumidifying from the mobile app
1. On any widget screen, tap
2. Select OFF or AUTO.
The mobile application notifies you of air filter service (replacement or cleanup),
condensation risks and universal contact state changes. If there are notifications, a
red indication is displayed on the upper right corner of the menu icon,
Expanding
> Notifications displays notification details.
By default, the mobile application can receive air filter reminders, condensation
notifications and universal contact notifications. You can turn off the notifications as
needed.
If air filter is replaced or cleaned and air filter operating hours are reset under
Notifications, air filter notifications are gone.
When a universal contact is configured as input in the local thermostat, use the
mobile application to see if it is switched on or off when the universal contact
monitoring function is on.
For more information on how to configure a universal contact input, see Changing
system setup.
Checking device notifications
.
, and expand the drop down list next to
, and then tap Humidify or Dehumidify.
7
on the
.
29 | 40
Advertisement
Table of Contents
