Countershaft Disassembly/Assembly/Inspection - KYMCO UXV 500i Service Manual

11
.FINAL REDUCTION/
TRANSMISSION SYSTEM
COUNTERSHAFT
DISASSEMBLY/ASSEMBLY/
INSPECTION
DISASSEMBLY
Remove the countershaft assembly (refer to
the "TRANSMISSION
REMOVAL/INSPECTION/
INSTALLATION" section in this chapter).
Remove the washer and high drive gear.
Remove the high/low gear clutch dog
Remove the clip, then remove the washer and
low drive gear.
Remove the clip, then remove the stopper
wheel.
Remove the clip, then remove reverse gear
clutch dog.
Remove the clip, then remove the washer and
reverse drive gear.
11-27
Washer
High Drive Gear
Clip/Washer Low Drive Gear
Clutch Dog Clip
UXV 500
Washer
High/Low Gear Clutch
Stopper Wheel
Clip
Reverse Drive Gear
Clip/Washer