KYMCO UXV 500i Service Manual page 8

1
. GENERAL INFORMATION
UXV 500
The connector shall be inserted
completely.
If the double connector has a lock, lock it
Snapping!
at the correct position.
Check if there is any loose wire.
Before connecting a terminal, check for
damaged terminal cover or loose
negative terminal.
Check the double connector cover for
proper coverage and installation.
Insert the terminal completely.
Check the terminal cover for proper
coverage.
Do not make the terminal cover opening
face up.
Secure wire harnesses to the frame with
their respective wire bands at the designated
locations.
Tighten the bands so that only the insulated
surfaces contact the wire harnesses.
1-6