Kenmore BC7005 Use & Care Manual page 24

WARNING
Electrical Shock Or Personal Injury
Hazard
Always turn off and unplug vacuum
cleaner before performing maintenance
to the vacuum cleaner. Failure to do so
could result in electrical shock or personal
injury from vacuum cleaner suddenly
starting.
TO CHECK THE BRUSHES
New Brushes
When brushes are worn to the level of the
base support bars, replace the brushroll
assembly.
BRUSHROLL SERVICING
Worn Brushes
Base
Support
Bar
- 24 -
TO REPLACE BRUSHROLL ASSEMBLY
1. Remove the floor brush from the
PowerMate .
®
2. Remove PowerMate
belt and brushroll assembly. See "To Remove
Belt" in BELT CHANGING AND BRUSHROLL
CLEANING (page 22).
3. Install new brushroll assembly.
4. Reinstall belt, brushroll cover and
PowerMate cover. See "To replace belt" in
®
BELT CHANGING AND BRUSHROLL
CLEANING (page 22).
5. Insert floor brush into PowerMate
floor brush locks into place.
NOTE: See REPLACEMENT PARTS for part
number and purchase details (page 5).
® cover, brushroll cover,
until
®