Installation Procedures; Updating The Compaq Insight Manager Agents - Compaq Smart Array 221 User Manual

7-30 Installing the Operating System Drivers

Installation Procedures

To install the Smart Array 221 Controller driver, follow the installation
procedures specified in the README.SSD file.
Installation of the Smart Array 221 Controller is now complete. Reboot the
server to begin using the array controller as it has been configured.
Updating the Compaq Insight
Manager Agents
If you are using Compaq Insight Manager, you will need to update the Insight
Agents to support the new Smart Array 221 Controller. If you used SmartStart
4.21 or later to install the operating system on a new Smart Array 221
Controller installation or upgrade your driver in an existing installation, the
agents were automatically updated for you by SmartStart and you do not have to
manually update the agents.
The correct agents can be obtained from your local Compaq Reseller or
Authorized Compaq Service Provider. Refer to the documentation included with
Compaq Insight Manager for the correct procedure for updating agents.
Installation of the Compaq Smart Array 221 Controller is now complete. Reboot
the server to begin using the array controller.
Writer: Karen Hale Project: Compaq Smart Array 221 Controller User Guide Comments: 388541-001
File Name: H-CH07.DOC Last Saved On: 11/3/98 9:51 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED