Cardo Systems Scala 700LX Quick Manual page 11

ADVANCED FUNCTIONS
DESIRED RESULT:
SWAP between two
active mobile phones
Check the Battery
Status Indicator
Disable/Enable the
Status Light
Change the Wheel orientation Power on the Headset by pressing and holding the
Locate the Headset
(Buzzer Function)
Callback function
Disable/Enable Auto-Answer While in Standby mode, press and hold the Wheel
Disable/Enable Button Lock
Transfer a call to the phone
or from the phone
Accept call waiting or
swap between calls
Conference call
REQUIRED ACTION:
While both phones are turned on and the Headset
is in Standby mode, double-press the Wheel inwards
While in Standby mode, press the Control Button
for at least four seconds
While the Headset is in Standby mode, move the
Wheel down and hold for at least four seconds
Control button while pressing in and holding the
Wheel for four seconds
Dial a call with the mobile phone and press Send/Talk.
While the call is in progress, begin pressing the
mobile phone volume buttons up, then down
repeating the up/down sequence five or more times.
The Headset will start buzzing
While in Standby mode, rapidly move the Wheel
down twice and release (double down-click)
upwards for seven seconds
In Standby mode, simultaneously press the Wheel
and the Control button for at least four seconds
During a call, long press the Control Button (NOTE:
On some mobiles "Transfer Back" requires short press)
During an active call and one call on hold or waiting,
short press the Wheel.
During an active call and one call on hold, long
press the Wheel
11