Cardo Systems Scala 700 Quick Manual page 4

Cardo systems scala 700: quick start

Hide thumbs Also See for Scala 700:

Table of Contents

scala-700

You can enter pairing mode at any time by pressing the Wheel

for at least 8 seconds while the headset is turned off

Your Headset can pair with up to eight phones, and will automatically

connect to the last phone connected to the Headset. To connect to a

different phone go to the Bluetooth menu of the active mobile phone

and disconnect the Headset. Now go to the Bluetooth menu of the

desired phone and connect the Headset to this phone.

ATTACHING THE HEADSET TO YOUR EAR

Attach the Headset to your ear using the Ear-Loop. Insert the pin of the

Ear-Loop to a suitable depth so that the speaker fits snugly into your

ear (hovering above your ear canal), then bend the flexible bow of the

Ear-Loop to produce a snug but comfortable fit.

SWAP BETWEEN TWO ACTIVE MOBILE PHONES

The scala-700 allows you to swap, i.e. to alternately use one among the

last two phones to which it has been connected.

While both phones are turned on and the headset is on standby, double-

press the wheel. Now the Headset will switch to the second phone.

Each time you double-press the wheel, the alternate phone connects

to the Headset.

Table of Contents