Cardo Systems Scala 700 Quick Manual page 3

scala-700
TM
TURNING THE HEADSET ON FOR THE FIRST TIME
In order for your headset to work with your cellular phone, they must
first recognize each other. This process is called "pairing", and only
needs to be performed once for each phone.
1. To initiate pairing, press the Wheel for at least 8 seconds while the
headset is turned off. The Status Light will flash red and blue indicating
that the headset is in pairing mode.
2. Turn on your phone and make sure that its Bluetooth function is
activated.
3. Search for Bluetooth devices on your phone by following the phone's
instructions.
4. After a few seconds the phone will list the scala-700 as a "discovered
device". Select it and follow your phone's instructions to accept the
pairing.
5. When prompted, enter 0000 (four zeros) as your PIN or passkey.
6. Your phone will confirm that pairing has succeeded.
Note: If pairing is not completed within two minutes the headset
will return to standby mode.
3