Cardo Systems Scala 700 User Manual
Cardo Systems Scala 700 User Manual

Cardo Systems Scala 700 User Manual

Hide thumbs Also See for Scala 700:

Advertisement

Quick Links

Federal Communications Commission (FCC) Statement
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user's authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Notice: Any changes or modification not expressly approved by the party responsible
could void the user's authority to operate the device.
I

Advertisement

Table of Contents
loading

Summary of Contents for Cardo Systems Scala 700

  • Page 1 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS 1. INTRODUCTION ..........................1 .............................1 EATURES ............................1 EFINITIONS 2. SAFETY ..............................1 ..........................2 HILE RIVING ....................2 NTERFERENCE THER EVICES Pacemakers .............................2 Hearing Aids ...........................2 Other Medical Devices........................2 3. RETAIL BOX CONTENTS ......................3 4. BEFORE USING ..........................4 ............................4 OMPONENTS ........................4 HARGING THE ATTERIES 5.
  • Page 3: Introduction

    • Follow all instructions and warnings labeled 1. Introduction and marked in this manual. Congratulations and thank you for purchasing • Use a cloth to clean the headset. DO NOT the scala-700 one of the world's most ® use liquid or aerosol cleaners. advanced and versatile Bluetooth powered wireless headsets for mobile phones.
  • Page 4: Use While Driving

    Use While Driving Check the rules and regulations regarding the use of wireless headsets in the area where you drive and obey the laws at all times. Pull over to the side of the road and park before making or answering a call if driving conditions require it.
  • Page 5: Retail Box Contents

    3. Retail Box Contents scala-700 Headset Ear Loop Ear Loop Bow (flexible) Ear Loop Pin (rigid) Wall Charger Quick Start Guide, Warranty and Registration Card...
  • Page 6: Before Using

    5. Getting Started 4. Before Using With the scala-700 Components Turn On/Off To turn ON the Headset, press and hold the wheel for at least 3 seconds until an ascending tone is heard, and a blue indicator light flashes 3 times. Release the button. The blue light will flash every 3 seconds to indicate that the device is in standby mode.
  • Page 7: Reconnecting The Headset To A Paired Phone

    6. When prompted by your phone, enter 0000 (4 zeros) as your PIN or passkey. 7. Your phone will confirm successful pairing. NOTE: If pairing is not completed within two minutes, the headset will return to standby mode (flashing blue every 3 seconds). To pair, re-start the process from the beginning.
  • Page 8: Voice Dialing

    NOTE: Some phones do not transfer the call Mute Function automatically to the headset when initiating To activate MUTING: During an ongoing call, the call by the phone’s keypad. In this case briefly press the center square of the Wheel. press briefly CTRL or use the phone’s keypad To de-activate the Mute function, tap the to transfer the call to the headset.
  • Page 9: Understanding The Light Indicators (Leds) And Sound Signals

    7. Understanding the Indicator Lights (LEDs) and Sound Signals Indicator Lights The Headset uses the following indicator lights to display its status Indicator Light Status None Headset is off or Indicator Light is disabled 3 blue flashes Powered on successfully 3 red flashes Powered off successfully Alternating Red/blue...
  • Page 10: Faqs

    How can I improve stability of the headset 8. FAQs when using the Ear Loop? What is the Cardo scala-700 headset? The bow of the Ear Loop is highly flexible and can be bent to tighten its grip around your ear. The scala-700 wireless headset is a comfortable, stylish, and easy to use accessory...
  • Page 11: Summary Of Functions

    9. Summary of Functions If you want to… …do this Turn on the headset Press the Wheel steadily for at least 3 seconds Turn off the headset Press the Wheel steadily for at least 3 seconds Answer a call Short press the Control Button NOTE: Wait until you hear the incoming call on the headset (not only on the phone) before pressing CTRL Reject an incoming call...
  • Page 12: Troubleshooting

    10. Troubleshooting Problem Action Pairing fails 1. Delete scala-700 from your paired device list in your phone (if it is listed). 2. Turn off the mobile phone and headset. 3. Take the battery out of the phone and put it back in. 4.
  • Page 13: Technical Specifications

    The Company disclaims all responsibility for any equipment not furnished by Cardo Systems Inc., which is attached to or • Reorient or relocate the receiving antenna. used in connection with the scala-700 headset. Furthermore, •...
  • Page 14 of the scala-700 headset resulting from the use of ancillary change its products, manuals and specifications equipment not furnished by the Company. at any time without notice. What this warranty does not cover 1. Defects or damage resulting from the use of this product in other than its normal and customary manner.
  • Page 15 ©2006 Cardo Systems Inc. Assembled in China. Bluetooth® is a trademark owned by Bluetooth® SIG, Inc., scala-700™ is a trademark owned by Cardo Systems, Inc. All rights reserved by Cardo Systems, Inc. Cardo reserves all rights and explicitly prohibits any...

Table of Contents