Connections To A Tv Or Vcr - JVC GR-D750AH Instructions Manual

Connections To A TV Or VCR

S-Cable
(optional)
TV
1Black to S-VIDEO IN (Connect when your
TV/VCR has S-VIDEO in and AV input
connector. In this case, it is not necessary to
connect the yellow video cable.)
2Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors).
3Red to AUDIO R IN*
4White to AUDIO L IN*
* Not required for watching still images only.
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Centre described on the sheet included in
the package for details on its availability. Make
sure to connect the end with a core filter to the
camera.The core filter reduces interference.
1
2
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
referring to your VCR's instruction manual.
4
TV.
To AV 5
connector
the TV to its VIDEO mode.
6
or
(
●
Audio/Video
cable
(provided)
To choose whether or not the following
displays appear on the connected TV
●
●
●
VCR
NOTES:
●
●
●
VIDEO PLAYBACK
Make sure all units are turned off.
Connect the camcorder to a TV or VCR as
Connect the VCR output to the TV input,
Turn on the camcorder, the VCR and the
Set the VCR to its AUX input mode, and set
Start playback on the camcorder.
pg. 19)
Please set "16:9 OUTPUT" of Playback Menus
so that the image may suit your TV (16:9 TV or
4:3 TV). ( pg. 24, 25)
Date/Time
Set "DATE/TIME" to "ON" or "OFF" (
Time Code
Set "TIME CODE" to "ON" or "OFF" (
Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/TV"
( pg. 25).
It is recommended to use the AC Adapter as
the power supply instead of the battery
pack. ( pg. 13)
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder's Power Switch
to"REC", then set your TV to the appropriate
input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
21
EN
pg. 25).
pg. 25).