Connections To A Tv Or Vcr - JVC GR-D271 Instructions Manual

VIDEO PLAYBACK
22
EN

Connections To A TV Or VCR

To AV
connector
1 2
VCR
A
Yellow to VIDEO IN (Connect when your TV/
VCR has only A/V input connectors.)
B
Red to AUDIO R IN*
C
White to AUDIO L IN*
* Not required for watching still images only.
Open the cover.
Audio/Video cable
(provided)
3
TV
1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set
the TV to its VIDEO mode.
6
Start playback on the camcorder. (
To choose whether or not the following
displays appear on the connected TV
● Date/Time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
( pg. 31, 36)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
● Time Code
Set "TIME CODE" to "ON" or "OFF".
( pg. 31, 36)
● Indications other than date/time and time code
Set "ON SCREEN" to "OFF", "LCD" or "LCD/TV".
( pg. 31, 36)
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
( pg. 14)
● To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder's Power Switch to "A" or
"M", then set your TV to the appropriate input
mode.
● Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
pg. 20)