Siemens Cerberus PACE Compact Operation Manual page 51

Error code Description
P36 Internal temperature measurement error
E37 Battery 1 connector high current
E38 Battery 2 connector high current
E39 Battery 3 connector high current
E40 Battery 4 connector high current
P41 Battery 1 balancer system fault
P42 Battery 2 balancer system fault
P43 Battery 3 balancer system fault
P44 Battery 4 balancer system fault
E45 Battery 1 fault (or an improper balancer connection)
E46 Battery 2 fault (or an improper balancer connection)
E47 Battery 3 fault (or an improper balancer connection)
E48 Battery 4 fault (or an improper balancer connection)
*) Fault without latched indication - disappears independently when the fault reason is ceased. Other faults
require manual reset, which can be not efficient if the failure cause has not ceased.
**) Battery has been disconnected or connected during operation (after the system start-up).
A6V11899865_en--_b
Error list for power supply in PC1002
Appendix 17
51 | 54