Diagnostics; Led Displays - Siemens SINUMERIK MCP-S Series Equipment Manual

Diagnostics

7.1

LED displays

LED states in PROFINET mode
0 Device is switched off
1 Device is switched on and the in‐
2 Boot loader is started
3 Linux is started
4 MCP software is running, no PN
5 MCP software is running, PN com‐
6 MCP software is running, PN com‐
7 Error, e.g. incorrect configuration
*) LEDs in peripheral devices (keyboards, Powerrides and user keys connected to the digital outputs)
LED states in IE mode
0 Device is switched off
1 Device is switched on and the in‐
2 Boot loader is started
3 Linux is started
ONE MCP Part 1: MCP xxxx
Equipment Manual, 07/2020, A5E50324729B AA
State
ternal voltage is in the setpoint
range
communication
munication established, STOP
state
munication established, RUN state
or damaged USB peripheral
State
ternal voltage is in the setpoint
range
H1 H2 H4 PN
SYNC FAULT
Off Off Off
Off Off Off
Off On Off
On On Off
Off Off On
On Off On
0.5 Hz Off On
4 Hz 4 Hz 4 Hz
H1 H2 H4 PN
SYNC FAULT
Off Off Off
Off Off Off
Off On Off
On On Off
7
H5 IE H3 PWR PER *)
Off Off Off
Off On N/A
Off On N/A
Off On N/A
Off On 1 Hz
Off On N/A
Off On N/A
4 Hz On 4 Hz
H5 IE H3 PWR PER *)
Off Off Off
Off On N/A
Off On N/A
Off On N/A
53