Mounting
NOTICE
Protection of interfaces against unauthorized access
Machine control panels must be integrated and operated in a housing/console/control cabinet
so that interfaces can be protected against unauthorized access, as described in the
"Connecting" section.
The safety of a system with an integrated MCP with operator panel front is the responsibility of
the person setting up the system.
Observe all relevant information from this manual regarding the mounting of the chosen
operator panel front.
The mounting at the installation site is performed in accordance with the instructions of the
chosen operator panel front.
Panel cutout
Excerpts for installing the respective devices are shown in Part 2 of the documentation.
32
ONE MCP Part 1: MCP xxxx
Equipment Manual, 07/2020, A5E50324729B AA