Siemens SINUMERIK MCP-S Series Equipment Manual page 22

Operator control and display elements
3.3 Interfaces
1
on
off
on
off
on
off
on
off
on
off
on
off
on
off
MCP set up as IE
You can assign a logical address to the MCP for communication via Ethernet with the 10-bit
switch S1.
Table 3-3
1
off
The two switches S1-9 and S1-10 must be set to "off" (IE functionality).
The switches S1-1 to S1-8 define the MCP address in the range of 0 to 255.
The addresses from 192 to 223 count as the default range.
The MCP address is used as a reference for addressing an MCP during the PLC parameter
assignment.
Table 3-4
1
on
x
on
off
on
off
on
off
on
22
2 3 4 5 6
off on on off off
off on on off off
on off on off off
on off on off off
off off on off off
off off on off off
on on off off off
on on off off off
off on off off off
off on off off off
on off off off off
on off off off off
off off off off off
off off off off off
Setting of switch S1 as delivered
2 3 4 5 6
off off off off off
Settings of switch S1
2 3 4 5 6
on on on on on
x x x x x
on on on on off
on on on on off
off on on on off
off on on on off
on off on on off
on off on on off
off off on on off
7 8 9 10 Meaning
off off Default device name: mcp-pn13
off off Default device name: mcp-pn12
off off Default device name: mcp-pn11
off off Default device name: mcp-pn10
off off Default device name: mcp-pn9
off off Default device name: mcp-pn8
off off Default device name: mcp-pn7
off off Default device name: mcp-pn6
off off Default device name: mcp-pn5
off off Default device name: mcp-pn4
off off Default device name: mcp-pn3
off off Default device name: mcp-pn2
off off Default device name: mcp-pn1
off off Default device name: mcp-pn
7 8 9 10 Meaning
on on off off MCP address 192
7 8 9 10 Meaning
off off
on on MCP address 255
x x "
on on MCP address 223
on on MCP address 222
on on MCP address 221
on on MCP address 220
on on MCP address 219
on on MCP address 218
on on MCP address 217
Equipment Manual, 07/2020, A5E50324729B AA
ONE MCP Part 1: MCP xxxx