Diagnostics; Control - Siemens SINAMICS BOP-2 Operating Instructions Manual

Diagnostics

Diagnostic menu
The Diagnostics menu allows the user to access the following function:
● Acknowledge all faults
● Faults
● History
● Status
To access the Diagnostics menu, the following actions should be performed:
1. Using the
2. Press
3. Using the
4. Press
The individual functions are described below.
Acknowlege faults
When a fault condition occurs within the Inverter/motor system; the system is stopped by the
Inverter and requires that all faults are acknowledged before restarting the system.
To acknowledge all active faults within the Inverter/motor system, the following procedure
should be performed:
1. Using the
2. Press
3. Using the
4. Press
5. The BOP-2 will automatically return to the top level
Basic Operator Panel 2 (BOP-2)
Operating Instructions, 2010-03-01, A5E02778927A AB
and keys navigate to the Diagnostics
screen.
to select the Diagnostics menu.
and keys select the required screen.
to display the selected screen.
Pressing for more than 3 seconds at any point
during this sequence will cause the BOP-2 to return
to the status screen. A short press of the
cause the BOP-2 to return to the previous screen.
and keys navigate to the Diagnostics
screen.
to select the Diagnostics menu.
and keys select ACKN ALL screen.
to acknowledge all active faults.
diagnostic menu.
Pressing for more than 3 seconds at any point
during this sequence will cause the BOP-2 to return
to the status screen. A short press of the
cause the BOP-2 to return to the previous screen.
MONITORING MONITORING
PARAMETER PARAMETER
key will
MONITORING MONITORING
PARAMETER PARAMETER
key will
6

CONTROL

CONTROL DIAGNOSTICS DIAGNOSTICS
DIAGNOS
SETUP SETUP EXTRAS EXTRAS
CONTROL CONTROL DIAGNOSTICS DIAGNOSTICS
ACKN ALL
SETUP SETUP EXTRAS EXTRAS
23