Canon imageCLASS 2300 Reference Manual page 121

F2 7
F3
BACK
5
8
Reset
5-16 Department ID Management
Press [F2] (M) or [F3] (L) to confirm the count information ©
press [BACK].
The count information is shown, from left to right: The Department ID, the
counted pages, and the maximum page number. If the maximum page number
is displayed as <0>, the maximum limit has not been specified. If it is displayed
as a space, DEPT. ID MANAGEMENT has been set to '01 OFF'. (See "Restrictions
Using Department ID Management," on p. 5-17.)
The COUNT INFORMATION menu returns.
NOTE
If the department whose information you want to check is not displayed, press
F2 F3
(M) or (L) until it is displayed.
If a job without ID is sent while the Department ID Management display is shown,
only the print count is displayed at the end of the count information.
If you want to display the print or transmission limit, Restrict Printing or Restrict TX,
respectively, must be set to '02 ON' in the RESTRICTIONS menu. (See
"Restrictions Using Department ID Management," on p. 5-17.)
Press [Reset] to return to the Basic Features screen.
NOTE
If you select <02 COUNT RESET> in step 5, and then select <01 ON>, the counter
information is deleted.