Install The Toner Cartridge - Canon imageCLASS 2300 Setup

Install the toner cartridge.

1 Open the stack bypass.
3 Remove the toner cartridge from the bag.
Keep the bag in a safe place.
5 Hold the cartridge on a flat stable surface with
one hand, and pull out the seal completely
with the other hand.
7 Hold the cartridge by its handles (marked with
blue) and insert it in the machine horizontally
as far as it will go.
2 Slide out the left cover of the stack bypass.
4 Hold the cartridge with both hands and slowly
shake it sideways 1 and then back and forth
2 to distribute the toner inside the cartridge.
2
1
6 Remove the tape holding the orange
protective cover, and pull the release tabs on
the cover to detach it from the cartridge.
IMPORTANT
Do not touch the blue-green drum surface inside
G
the toner cartridge.
8 Close the left cover and the stack bypass.
1
Tabs
Protective cover