Goodman GMEC80 Service Instructions Manual page 27

SERVICING
AUXILIARY LIMIT
CONTROL
BLOWER HOUSING
Auxiliary Limit Control Location
HIGH VOLTAGE
D ALL
ISCONNECT POWER BEFORE SERVICING OR
M
INSTALLING THIS UNIT. ULTIPLE POWER SOURCES MAY
F
BE PRESENT. AILURE TO DO SO MAY CAUSE PROPERTY
DAMAGE, PERSONAL INJURY OR DEATH.
1. Remove blower compartment door to gain access
to the auxiliary.
2. Remove the wires from the auxiliary limit control ter-
minals.
3. Using an ohmmeter, test for continuity across the
two terminals.
LIMIT
AUXILIARY LIMIT
CONTROL
WARNING
VOLT / OHM
METER
RED
RESET
BUTTON
IDENTIFYING
Testing Auxiliary Limit Control
COLOR
TAB
27