Connecting The Scanner - Canon CanoScan LiDE 500F Quick Start Manual

Connecting the Scanner

Connecting the Scanner
1
Connect the scanner to the computer with the supplied USB interface cable.
Small Square Connector
• Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.
• When the scanner is connected to the USB 1.1 port on Windows XP and "HI-SPEED USB
Device Plugged into non-HI-SPEED USB Hub" message appears, ignore the message. The
scanner operates in this condition without problems.
• The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
There are cable holders on the side of the scanner to hold the USB cable. Use the holders to organize the
cable.
Hold the cable with the holders before setting up the stand in the upright position.
8
Cable Holders
USB Connector
Wide Flat Connector
USB Interface Cable