Canon CanoScan LiDE 500F Quick Start Manual page 13

4
Click the Acquire icon
and select [Acquire].
ScanGear CS will start.
• In the Simple Mode in ScanGear CS, you can scan in three easy steps: (Step 5) Select Source,
(Step 6) Preview and (Step 8) Scan.
5
Select a Select Source option.
Select [Photo (Color)].
6
Click [Preview].
After calibration, the preview scan will start and gradually
display the image.
• Do not touch the scanner while it is
operating.
7
If necessary, perform the following step.
Select a Destination option.
Select an option according to how the scanned image will be
used: [Print (300 dpi)], [Image Display (150 dpi)] or [OCR (300
dpi)].
Determining the Output Size
• With Print (300 dpi), select the size of the output paper.
• With Image Display (150 dpi), select a size appropriate for
your computer display.
• When OCR (300 dpi) is selected, the Output Size is fixed to
the Flexible option.
• The Flexible option scans the item at a scale of 100%.
or click the [File] menu
[Print (300 dpi)]
[Image Display (150 dpi)]
Try Scanning
13