Canon CanoScan LiDE 500F Quick Start Manual page 7

Setting the Stand
• The scanner weighs approximately 2.0 kg. Be careful not to drop.
• Before setting the stand, make sure that there isn't a space between the document
cover and the surface of the document glass (p. 11, Step 3).
1
Turn the scanner upside down.
2
Lift the stand on the scanner back in the
direction of arrow
3
Place the stand's end around the front
side of the scanner (arrow
4
Push to the direction of arrow
the marks on the scanner and the
stand align.
5
Slowly turn the scanner over and set it
upright on the stand in position.
and then arrow .
).
until
Positioning the Scanner
7